Zaunpfosten Typ U verzinkt mit Edelstahl-U-Bügeln, Rechteckrohr 60 x 40 x 2 mm
Edelstahl-U-Bügel am Zaunpfosten Typ U in Anthrazitgrau, Detail der Mattenbefestigung
Zaunpfosten Typ U in Anthrazitgrau RAL 7016 mit eingehängter Doppelstabmatte
Zaunpfosten Typ U in Moosgrün RAL 6005 mit Edelstahl-U-Bügel, Detailansicht
Zaunpfosten Typ U in Moosgrün RAL 6005 an einem Doppelstabmattenzaun im Garten
Doppelstabmattenzaun mit Zaunpfosten Typ U auf unebenem Gelände
Zaunpfosten Typ U in Moosgrün RAL 6005 an einer Beeteinfassung

Type U Fence Post with Stainless Steel U-Bracket - Galvanized, Moss Green or Anthracite Gray

SKU: U-ZP11U

Stainless steel U-bolts instead of clamping plates, allowing for angular adjustment

Suitable for sloping sections and uneven terrain

Available optionally with 60 cm ground embedment or with base plate

Mounting set with stainless steel bolts and stainless steel nuts included in the scope of delivery

Gesetzliche Gewährleistung (EU-Hinweis) Ihr Europa

Color:

Color
Height:

Height
Quantity:
15,42 €inkl. MwSt.

Parcel or freight item: plus shipping, free shipping within Germany from €1,000 Shipping info

Lieferzeit: 2 to 3 weeks
Spedition/Paketdienst mit Terminankündigung (Avis)
Frage zum Produkt
American Express Apple Pay EPS Google Pay Klarna Mastercard PayPal Visa Kauf auf Rechnung Vorkasse
5,0 82 Google-Bewertungen

Type U Fence Post with Stainless Steel U-Bracket for Uneven Terrain

On a slope every clamping system reaches its limit, because the mesh panel sits at an angle to the post. The Type U solves this with stainless steel U-brackets that wrap around the panel instead of pressing it flat. The panel can therefore be twisted a little and the fence follows the terrain without having to rework every post.

That makes the U the all-rounder in the range: it works on a straight run just as well as on a sloping one, and installation is faster than with cover-strip posts, because only the bracket is placed and bolted.

Technical data

  • Rectangular tube 60 x 40 x 2 mm
  • For fence heights up to 2430 mm, post lengths up to 3000 mm
  • Available with a 60 cm ground section or with a base plate
  • Mounting kit including stainless steel brackets and stainless steel nuts
  • Hot-dip galvanized, RAL versions additionally powder-coated in RAL 6005 moss green or RAL 7016 anthracite gray

What to consider on a slope

Plan the post spacing before setting them. On a steep slope the fence is either stepped or the panel follows the incline. Both work with the U-bracket, but the heights of the end posts then differ. Measure at the highest and at the lowest point and order the posts to match. You will find the other post types for straight runs under Fence Posts.

Your advantages

  • Stainless steel U-brackets instead of clamping plates, so the angle stays adjustable
  • Suitable for sloping runs and uneven terrain
  • Either set in concrete or mounted on a base plate
  • Quick installation, mounting kit included

Questions and Answers

For all posts in this series except the privacy screen post Type A80, the figure is the fence height, meaning the height of the double-rod mesh panel. The post itself is longer because it is set in concrete. For the Type A80, the selection shows the overall length of the post instead, and the matching fence height is stated right next to it.

One post per fence bay, plus one extra at the end of the run. The bay width is stated with each double-rod mesh panel. Every change of direction adds a corner post, and a gate adds a gate post. Measure the run before ordering, not from the plan but on the property itself.

On a post with a cover strip, a flat steel bar runs the full height of the post and conceals the joint between two panels. With clamping plates, each panel is clamped individually with a small stainless steel plate and the joint stays visible. The cover strip gives a calmer fence line, while the clamping plate is quicker to install.

The short post Type A without a ground section, together with a base plate. It is anchored onto L-shaped retaining blocks, paving, asphalt surfaces or a concrete wall. The base plate is not included in delivery and is ordered separately. Alternatively, the fence post Type U is available with a base plate as an option.

Hot-dip galvanized means the finished post is immersed in a zinc bath, where the zinc bonds metallurgically with the steel. Sendzimir galvanized means the steel strip was already galvanized before it was processed. The bare posts are hot-dip galvanized in an immersion bath to EN ISO 1461. The powder-coated posts are Sendzimir galvanized and additionally carry the powder layer, which increases corrosion protection further.

Yes. Once the strips are woven in, the air-permeable mesh becomes a closed surface and the wind pushes against it instead of passing through. That load ends up in the post and in the foundation. This is what the privacy screen post Type A80 is for, made from 80 x 40 x 2 mm tube and set in concrete over a greater length, so it meets the structural requirements.