Zaunpfosten Typ A verzinkt, Rechteckrohr 60 x 40 x 2 mm mit durchgehender Abdeckleiste
Doppelstabmattenzaun in Anthrazitgrau RAL 7016 mit Zaunpfosten Typ A auf einer Wiese
Zaunanlage aus Doppelstabmatten mit Zaunpfosten Typ A entlang einer Grundstücksgrenze
Zaunpfosten Typ A in Anthrazitgrau mit Kunststoffkappe, Detail am Doppelstabgitter
Hoher Doppelstabmattenzaun mit Zaunpfosten Typ A vor einem Gewerbegebäude
Zaunpfosten Typ A in Moosgrün RAL 6005 an einer Grundstückseinfassung mit Hecke
Doppelstabmattenzaun mit Zaunpfosten Typ A entlang eines Gehwegs
Doppelstabmattenzaun mit Zaunpfosten Typ A als Einfriedung eines Firmengeländes
Verzinkter Doppelstabmattenzaun mit Zaunpfosten Typ A als Absperrung auf einer Baustelle
Zaunpfosten Typ A in Anthrazitgrau mit Doppelstabmatte an einer Hofeinfahrt

Type A Fence Post with Full-Length Cover Strip - Galvanized, Moss Green or Anthracite Gray

SKU: A-ZP11A

Continuous cover strip conceals the joint between two double wire mesh panels

Plastic spacers keep the mesh away from the post and dampen noise

Hot-dip galvanized according to EN ISO 1461, additionally powder-coated in RAL colors

Comes drilled, riveted, and with pre-assembled mesh fence clips

Gesetzliche Gewährleistung (EU-Hinweis) Ihr Europa

Color:

Color
Height:

Height
Quantity:
22,99 €inkl. MwSt.

Parcel or freight item: plus shipping, free shipping within Germany from €1,000 Shipping info

Lieferzeit: 2 to 3 weeks
Spedition/Paketdienst mit Terminankündigung (Avis)
Frage zum Produkt
American Express Apple Pay EPS Google Pay Klarna Mastercard PayPal Visa Kauf auf Rechnung Vorkasse
5,0 82 Google-Bewertungen

Type A Fence Post with Full-Length Cover Strip for Double-Rod Mesh

On the Type A, the double-rod mesh panel is not held by a single small clamp plate but by a cover strip that runs the full height of the post. The joint between two panels disappears behind it. That is the difference you see from the street: one continuous line instead of visible panel ends and screw heads.

Plastic spacers sit between the mesh and the post. They prevent direct metal-to-metal contact. That is exactly what stops the fence from rattling when the wind pushes on it or a ball hits the panel.

Technical data

  • Rectangular tube 60 x 40 x 2 mm
  • Fence heights 630 to 2430 mm
  • Post lengths in the series 1100 to 3000 mm, for setting in concrete
  • Hot-dip galvanized to EN ISO 1461
  • Powder-coated posts are Sendzimir galvanized and additionally coated in RAL 6005 moss green or RAL 7016 anthracite gray
  • Fixing element every 200 mm, riveted with a galvanized steel rivet
  • Delivered drilled, riveted and with the mesh fence clamps fitted
  • Plastic cap included, aluminum cap with or without decorative ball on request

The height in the selection field is the fence height

Choose the height of your double-rod mesh panel, not the length of the post. The post is longer because it is set in concrete. If you are building on a solid base – on L-shaped retaining blocks, paving or a concrete slab – take the short post without ground section instead of the Type A and bolt it to a base plate.

What to watch when setting the posts

Size the foundation for the ground conditions, not for the post. On a fence 2030 or 2430 mm high the wind already has plenty to push against, all the more so once privacy screening strips are threaded in later. For that case the Type A80 privacy screening post offers a heavier tube. Set the corner post first and run your string line from there, then the alignment holds even on a slight slope.

Your advantages

  • The panel joint stays hidden behind the cover strip
  • Plastic spacers damp the noise at the mesh
  • Hot-dip galvanized to EN ISO 1461, plus powder coating in the RAL colors
  • Arrives on site drilled, riveted and with the clamps fitted

Questions and Answers

For all posts in this series except the privacy screen post Type A80, the figure is the fence height, meaning the height of the double-rod mesh panel. The post itself is longer because it is set in concrete. For the Type A80, the selection shows the overall length of the post instead, and the matching fence height is stated right next to it.

One post per fence bay, plus one extra at the end of the run. The bay width is stated with each double-rod mesh panel. Every change of direction adds a corner post, and a gate adds a gate post. Measure the run before ordering, not from the plan but on the property itself.

On a post with a cover strip, a flat steel bar runs the full height of the post and conceals the joint between two panels. With clamping plates, each panel is clamped individually with a small stainless steel plate and the joint stays visible. The cover strip gives a calmer fence line, while the clamping plate is quicker to install.

The short post Type A without a ground section, together with a base plate. It is anchored onto L-shaped retaining blocks, paving, asphalt surfaces or a concrete wall. The base plate is not included in delivery and is ordered separately. Alternatively, the fence post Type U is available with a base plate as an option.

Hot-dip galvanized means the finished post is immersed in a zinc bath, where the zinc bonds metallurgically with the steel. Sendzimir galvanized means the steel strip was already galvanized before it was processed. The bare posts are hot-dip galvanized in an immersion bath to EN ISO 1461. The powder-coated posts are Sendzimir galvanized and additionally carry the powder layer, which increases corrosion protection further.

Yes. Once the strips are woven in, the air-permeable mesh becomes a closed surface and the wind pushes against it instead of passing through. That load ends up in the post and in the foundation. This is what the privacy screen post Type A80 is for, made from 80 x 40 x 2 mm tube and set in concrete over a greater length, so it meets the structural requirements.