Lever Handle Set Lever/Lever Curved in Aluminum – with 2 Centering Rings and Hex Key

Each product page states the gate series the manufacturer intends the part for, for example VARIO light, compact, plus or trend. If you bought the gate elsewhere or do not know the series, send us a photo of the fitting together with its dimensions. We check that the part fits before shipping.

All profile cylinders marked KA21 open with the same key. If your garden gate and driveway gate are to open with one key, order the KA21 version for both gates.

On a double-leaf gate one leaf is held in place, the fixed leaf. The other leaf closes against it and is locked there. Without a gate stop the active leaf has no fixed counterpart. If the gate stop works with a bolt into the ground, that bolt needs a socket, for example a ground sleeve.

With a lever handle on both sides the gate can be opened from the inside and the outside without a key. A fixed knob on the outside is only a grip; from that side the gate is opened with the key. This is the usual solution when the gate should not open easily from the street.

This varies from part to part and is stated on the product page under Technical data. The serrated strip comes without screws, the wall mount without bolt anchors, and the aluminum stop for swing gates without accessories.

For the VARIO trend gate series there is a wall mount for this: a plate measuring 150 x 100 mm with four M12 holes for bolt anchors. The bolt anchors are ordered separately.