Sichtschutzpfosten Typ A80 in Moosgrün RAL 6005, Rohr 80 x 40 x 2 mm mit Abdeckleiste
Doppelstabmattenzaun mit Sichtschutzpfosten Typ A80 in Anthrazitgrau

Type A80 Privacy Screen Post for Privacy Strips - Galvanized, Moss Green or Anthracite Gray

SKU: A80-ZP22A80B7016

80 x 40 x 2 mm tube, designed for wind load when using privacy strips

Deeper concrete embedment to meet structural requirements

Cover strip and stainless steel screws included in delivery

Hot-dip galvanized or powder-coated in RAL 6005 moss green and RAL 7016 anthracite grey

Gesetzliche Gewährleistung (EU-Hinweis) Ihr Europa

Color:

Color
Post length:

Post length
Quantity:
77,68 €inkl. MwSt.

Parcel or freight item: plus shipping, free shipping within Germany from €1,000 Shipping info

Lieferzeit: 2 to 3 weeks
Spedition/Paketdienst mit Terminankündigung (Avis)
Frage zum Produkt
American Express Apple Pay EPS Google Pay Klarna Mastercard PayPal Visa Kauf auf Rechnung Vorkasse
5,0 82 Google-Bewertungen

Type A80 Privacy Screen Post for Double-Rod Mesh Fences with Privacy Strips

As soon as privacy strips are threaded into the mesh, the fence is no longer an air-permeable surface but a wall. The wind no longer passes through, it pushes. That load ends up entirely in the post and in the foundation. A standard 60/40 post is not designed for it.

The A80 is: an 80 x 40 x 2 mm tube, and a larger part of it is set in concrete. It therefore meets the structural requirements for use with a privacy screen.

Technical data

  • Tube 80 x 40 x 2 mm
  • Post length 2200 mm for a fence height of 1630 mm
  • Post length 2400 mm for a fence height of 1830 mm
  • Post length 2600 mm for a fence height of 2030 mm
  • For setting in concrete, larger ground section than on the standard post
  • With 40 x 4 mm flat steel cover strip, stainless steel bolts and plastic cap
  • 9, 10 or 11 fixing points, depending on the length
  • Hot-dip galvanized, or galvanized and powder-coated in RAL 6005 moss green or RAL 7016 anthracite gray

Here you select the post length, not the fence height

For this post the selection field shows the total length of the post. The corresponding fence height is listed next to it: a 2200 mm post for a 1630 mm fence, a 2400 mm post for an 1830 mm fence and a 2600 mm post for a 2030 mm fence. You will find the matching strips under Privacy Strips and Privacy Rolls.

Do not underestimate the foundation

The stronger post only helps if the foundation is up to it. For an 1830 or 2030 mm high, opaque fence in an exposed location, the foundation should be calculated and not set by feel. We are happy to advise on this before the first post goes in.

Your advantages

  • Tube 80 x 40 x 2 mm instead of 60 x 40 mm, designed for the wind load with a privacy screen
  • Larger section set in concrete, meets the structural requirements
  • Cover strip and stainless steel bolts included
  • Hot-dip galvanized or powder-coated in RAL 6005 and RAL 7016

Questions and Answers

For all posts in this series except the privacy screen post Type A80, the figure is the fence height, meaning the height of the double-rod mesh panel. The post itself is longer because it is set in concrete. For the Type A80, the selection shows the overall length of the post instead, and the matching fence height is stated right next to it.

One post per fence bay, plus one extra at the end of the run. The bay width is stated with each double-rod mesh panel. Every change of direction adds a corner post, and a gate adds a gate post. Measure the run before ordering, not from the plan but on the property itself.

On a post with a cover strip, a flat steel bar runs the full height of the post and conceals the joint between two panels. With clamping plates, each panel is clamped individually with a small stainless steel plate and the joint stays visible. The cover strip gives a calmer fence line, while the clamping plate is quicker to install.

The short post Type A without a ground section, together with a base plate. It is anchored onto L-shaped retaining blocks, paving, asphalt surfaces or a concrete wall. The base plate is not included in delivery and is ordered separately. Alternatively, the fence post Type U is available with a base plate as an option.

Hot-dip galvanized means the finished post is immersed in a zinc bath, where the zinc bonds metallurgically with the steel. Sendzimir galvanized means the steel strip was already galvanized before it was processed. The bare posts are hot-dip galvanized in an immersion bath to EN ISO 1461. The powder-coated posts are Sendzimir galvanized and additionally carry the powder layer, which increases corrosion protection further.

Yes. Once the strips are woven in, the air-permeable mesh becomes a closed surface and the wind pushes against it instead of passing through. That load ends up in the post and in the foundation. This is what the privacy screen post Type A80 is for, made from 80 x 40 x 2 mm tube and set in concrete over a greater length, so it meets the structural requirements.