Kurzpfosten Typ A ohne Bodeneinstand auf einer Betonmauer montiert
Kurzpfosten Typ A verzinkt mit durchgehender Abdeckleiste, Rechteckrohr 60 x 40 x 2 mm

Type A Short Post without Ground Section for Base Plates - Galvanized, Moss Green or Anthracite Gray

SKU: KA-ZP11KA

Without ground embedding, dowelled onto a solid surface with a base plate

Heights from 685 to 2485 mm

Same cover strip and appearance as the embedded Type A

Supplied drilled, riveted, and with pre-assembled mesh fence clamps

Gesetzliche Gewährleistung (EU-Hinweis) Ihr Europa

Color:

Color
Height:

Height
Quantity:
17,99 €inkl. MwSt.

Parcel or freight item: plus shipping, free shipping within Germany from €1,000 Shipping info

Lieferzeit: 2 to 3 weeks
Spedition/Paketdienst mit Terminankündigung (Avis)
Frage zum Produkt
American Express Apple Pay EPS Google Pay Klarna Mastercard PayPal Visa Kauf auf Rechnung Vorkasse
5,0 82 Google-Bewertungen

Type A Short Post without Ground Section for Mounting on a Solid Base

Not every fence can be set in concrete. On L-shaped retaining blocks, on paved areas, on a concrete wall or on an asphalt surface there is simply no ground for it. The Type A short post is built for exactly this case: it has no ground section and is anchored down with a base plate.

Technically it is the Type A, just without the part that otherwise sits in the concrete. The cover strip, clamps and spacers are the same, so the fence line looks identical.

Technical data

  • Rectangular tube 60 x 40 x 2 mm
  • Heights 685 to 2485 mm without ground section
  • Lengths 2285 and 2485 mm (fence height 2230 and 2430 mm) only in RAL 7016 anthracite gray
  • Cover strip made of 40 x 4 mm flat steel, slotted hole every 200 mm
  • Fixing element every 200 mm
  • Lower fence clamp set closer, acts as an anti-lift device
  • Hot-dip galvanized in the dipping bath to EN ISO 1461
  • Powder-coated posts are Sendzimir galvanized, RAL 6005 moss green or RAL 7016 anthracite gray
  • Delivered drilled, riveted and with mesh fence clamps fitted

Base plate and anchors belong with it

The short post comes without a base plate. You will find the matching plate and the ground anchors under Base Plates, Anchors and Bolts. Before drilling, check how thick the base material is. An L-block wall of 100 mm carries a 1030 fence; at a height of 2030 mm with wind off open ground, the structural calculation should be done.

Your advantages

  • No foundation needed, anchored to a solid base
  • Same look as the Type A set in concrete
  • Comes drilled, riveted and with clamps fitted
  • Hot-dip galvanized to EN ISO 1461, plus powder coating in the RAL colors

Questions and Answers

For all posts in this series except the privacy screen post Type A80, the figure is the fence height, meaning the height of the double-rod mesh panel. The post itself is longer because it is set in concrete. For the Type A80, the selection shows the overall length of the post instead, and the matching fence height is stated right next to it.

One post per fence bay, plus one extra at the end of the run. The bay width is stated with each double-rod mesh panel. Every change of direction adds a corner post, and a gate adds a gate post. Measure the run before ordering, not from the plan but on the property itself.

On a post with a cover strip, a flat steel bar runs the full height of the post and conceals the joint between two panels. With clamping plates, each panel is clamped individually with a small stainless steel plate and the joint stays visible. The cover strip gives a calmer fence line, while the clamping plate is quicker to install.

The short post Type A without a ground section, together with a base plate. It is anchored onto L-shaped retaining blocks, paving, asphalt surfaces or a concrete wall. The base plate is not included in delivery and is ordered separately. Alternatively, the fence post Type U is available with a base plate as an option.

Hot-dip galvanized means the finished post is immersed in a zinc bath, where the zinc bonds metallurgically with the steel. Sendzimir galvanized means the steel strip was already galvanized before it was processed. The bare posts are hot-dip galvanized in an immersion bath to EN ISO 1461. The powder-coated posts are Sendzimir galvanized and additionally carry the powder layer, which increases corrosion protection further.

Yes. Once the strips are woven in, the air-permeable mesh becomes a closed surface and the wind pushes against it instead of passing through. That load ends up in the post and in the foundation. This is what the privacy screen post Type A80 is for, made from 80 x 40 x 2 mm tube and set in concrete over a greater length, so it meets the structural requirements.