Eck-Zaunpfosten Typ AAE in Anthrazitgrau mit Aluminiumkappe mit Überstand und Abdeckleiste

Type AAE Corner Fence Post with Aluminum Cap - Galvanized, Moss Green or Anthracite Gray

SKU: AAE-ZP11QAAE

Aluminum cap with overhang instead of plastic cap

Square tube 60 x 60 x 2 mm for changing the direction of the fence line

Cover strip type A and stainless steel screws included in delivery

Hot-dip galvanized according to EN ISO 1461, additional powder coating in RAL colors

Gesetzliche Gewährleistung (EU-Hinweis) Ihr Europa

Color:

Color
Height:

Height
Quantity:
46,70 €inkl. MwSt.

Parcel or freight item: plus shipping, free shipping within Germany from €1,000 Shipping info

Lieferzeit: 2 to 3 weeks
Spedition/Paketdienst mit Terminankündigung (Avis)
Frage zum Produkt
American Express Apple Pay EPS Google Pay Klarna Mastercard PayPal Visa Kauf auf Rechnung Vorkasse
5,0 82 Google-Bewertungen

Type AAE Corner Fence Post with Aluminum Cap for Double-Rod Mesh

The AAE is the corner post in 60 x 60 x 2 mm square tube with an aluminum cap instead of plastic. At a corner that pays off in particular: the corner post usually stands on the street side or at the driveway, and so in plain view. A faded plastic cap is exactly what gets noticed there.

Documented from the manufacturer's data for the 1430 mm fence height: post length 2000 mm, 16 fixing elements, aluminum cap with overhang, Type A cover strip and stainless steel bolts.

Technical data

  • Square tube 60 x 60 x 2 mm
  • Fence heights 630 to 2430 mm
  • For setting in concrete
  • Aluminum cap with overhang
  • Type A cover strip with stainless steel bolts
  • Hot-dip galvanized to EN ISO 1461
  • Powder-coated posts are Sendzimir galvanized, RAL 6005 moss green or RAL 7016 anthracite gray

A matching combination

If you set the AAE at the corners, use the Type AA fence post with the same aluminum cap for the straight runs. The fence then looks consistent along the top. You will find all post types in the Fence Posts overview.

Your advantages

  • Aluminum cap with overhang, does not fade
  • 60 x 60 mm square tube for two fence directions
  • Type A cover strip and stainless steel bolts included
  • Hot-dip galvanized to EN ISO 1461, plus powder coating in the RAL colors

Questions and Answers

For all posts in this series except the privacy screen post Type A80, the figure is the fence height, meaning the height of the double-rod mesh panel. The post itself is longer because it is set in concrete. For the Type A80, the selection shows the overall length of the post instead, and the matching fence height is stated right next to it.

One post per fence bay, plus one extra at the end of the run. The bay width is stated with each double-rod mesh panel. Every change of direction adds a corner post, and a gate adds a gate post. Measure the run before ordering, not from the plan but on the property itself.

On a post with a cover strip, a flat steel bar runs the full height of the post and conceals the joint between two panels. With clamping plates, each panel is clamped individually with a small stainless steel plate and the joint stays visible. The cover strip gives a calmer fence line, while the clamping plate is quicker to install.

The short post Type A without a ground section, together with a base plate. It is anchored onto L-shaped retaining blocks, paving, asphalt surfaces or a concrete wall. The base plate is not included in delivery and is ordered separately. Alternatively, the fence post Type U is available with a base plate as an option.

Hot-dip galvanized means the finished post is immersed in a zinc bath, where the zinc bonds metallurgically with the steel. Sendzimir galvanized means the steel strip was already galvanized before it was processed. The bare posts are hot-dip galvanized in an immersion bath to EN ISO 1461. The powder-coated posts are Sendzimir galvanized and additionally carry the powder layer, which increases corrosion protection further.

Yes. Once the strips are woven in, the air-permeable mesh becomes a closed surface and the wind pushes against it instead of passing through. That load ends up in the post and in the foundation. This is what the privacy screen post Type A80 is for, made from 80 x 40 x 2 mm tube and set in concrete over a greater length, so it meets the structural requirements.