Ashtray Table EPSI 2.0 in Steel, DB 703, for Smoking Areas

The bench, ashtray table, wall ashtray, leaning bench, standing smokers' table and patio heater fit all four sizes R6, R10, R12 and R15 without modification. They are matched to the profile dimensions and the DB 703 iron mica finish of the series.

The green roof is an exception: it is cut to fit the particular roof area, so when ordering you have to state which shelter model it is intended for. If you choose the wrong size, the green roof set will not fit the roof.

If you order accessories at the same time as a smoking shelter of the RX 2.0 series, they are fitted at the factory and delivered together with the shelter on one vehicle. This means no additional transport costs, and the shelter arrives at your company site ready to use.

In that case the delivery time is governed by the shelter. If you order accessories on their own, the delivery time stated on the respective product page applies – depending on the item it is between four and eight weeks.

Yes. The bench, ashtray table, wall ashtray, standing smokers' table and leaning bench can be added at any time. They are placed or bolted down inside the shelter and require no changes to it.

Retrofitting is more involved for the patio heater and the green roof: the heater is mounted in the roof area and needs a power connection, and the green roof adds extra weight to the roof. Both can be retrofitted, but please discuss your case with us beforehand.

If you order at the same time as a shelter, we carry out the installation at the factory – you receive the shelter fully equipped. If accessories are delivered on their own, installation is usually straightforward and can be done without a specialist company.

There are two exceptions: the leaning bench is fastened with drop-in anchors through base plates onto a foundation provided on site. And the electrical connection of the patio heater or the lighting must be made on site by a qualified electrician.

As standard, the accessories of the RX 2.0 series are powder-coated in DB 703 iron mica and therefore match the color of the shelter's posts and roof frame. The Kip-Ex wall ashtray is made of rustproof stainless steel and is left uncoated.

The Deluxe leaning bench comes in RAL 9006 white aluminum as standard, but is available in any other RAL color on request. The Smoke-Table standing smokers' table comes with an aluminum-gray coated column and a black tabletop.

Yes. The infrared patio heater and the LED lighting run on 230 V and require a supply line, which is provided on site and connected by a qualified electrician. Plan the connection in before the shelter is set down.

The surface-mounted solar light and the solar light recessed into the roof work without a power connection. Both are selected directly in the shelter's product options and installed at the factory.

The powder-coated parts and the stainless steel need no maintenance. It is enough to wipe them down occasionally with water and a mild cleaner; you should avoid abrasive products and pressure washers, because they attack the coating.

The wooden slats of the bench and the wooden strips of the leaning bench have a weatherproof stain finish. Depending on the location and the amount of sunlight, it is advisable to reapply a suitable wood stain every few years to preserve the color.